There are a lot of materials for the finish of the balcony, in any store of building materials. Any material has its positive aspects and disadvantages. Plastic panels for finishing the balcony are becoming increasingly popular. Plastic for its qualities is appreciated. Such panels are very practical and their service life is very large. They are not afraid of moisture and temperature differences. A large palette of colors and shades is subject to, even for the most demanding taste. The plastic panels are very light, and knowing the condition of the balconies in old houses, it is extremely not desirable to weight the balcony. This material is very easy to install and does not require special care. Before you need to glaze in the interior decoration of the balcony or loggia. Glazing of balconies and loggias, work is not easy to require special skills and tools, trust this work specialists. Plastic panels are released from 10 to 60 cm wide. When using panels, you will get a seamless and smooth surface. Like any other material, plastic panels when buying should not be taken “imprisoned”. Take 10 - 15% more material (percentage of pruning). The plastic panels are attached to the crate. It is mounted, as a rule, from wooden rails. Reiki buy a small size if you are not going to insulate the balcony. The small size of the rails will allow you not to conceal the space, so a small balcony. The reasons are mounted horizontally. Fasten the first rail at the junction of the ceiling and walls, the second 2-7 cm from the floor. Reiki should be perpendicular. Window and doorways are upholstered around the perimeter. The remaining rails are mounted horizontally with a step of 20 - 60 cm so that the panels do not deform. If the lighting is planned on the balcony, take care of the wiring when installing the crate, this type of finish allows you to hide the wires of the wires. It is recommended to cut them in terms of installation of the panels in size. It is best to do this with a special hacksaw for plastic, so you will achieve a more even and neat cut. In the absence of such a hacksaw, you can use a hacksaw for metal. For the beginning of the installation, the starting profile is attached, sold in the same section as the panels themselves. Then the first panel simply invests in it. You can fix the panels with a construction stapler, small self -tapping screws or small cloves. There is no difference in these types of fasteners and they do not affect quality, so decide what is more convenient for you. Please note that the panel is attached to the edge, which is located on each panel, where the groove is. When inserting one panel into the other, join them tightly tightly, very carefully so as not to damage the plastic. If you move from one wall to another, special corner moldings will help you. When choosing lamps for lighting, choose special for plastic, they do not overheat the material. That's the whole simple way of lining the balcony with plastic. Have you thought about how your life would be different if you had as much money as you want, here's a great way to have it all, just go to the www.unlimitedip.io site.